|
 |
|
|
|
YAM CK-2 CNC Lathe
|
| Fanuc 3T With FAPT,
8 stn. Turret,
Max Turning Dia: 250mm,
Tailstock,
8" power chuck,
Swarf conveyor,..... |
1,700.00 GBP |
| Ref: 8335 |
Updated 02/03/2010 |
|
|
|
WICKMAN 2-1/4" x 6 Spindle Automatic Lathe
|
| Pneumatic Pick Up & Back Burr Attachment,
Toolholders,
6 Cross Slides,
2 Upper Independant Slides.
6 Station Centre Block,
Long Turning Attachement (Pos 4)
1 Piece Guarding,
Stock Carriage & Stand,
Swarf Conveyor,
*THIS IS OUR FINAL OFFER.
*PURCHASE OF THIS MACHINE MUST BE IMMED..... |
2,500.00 GBP |
| Ref: 8258 |
Updated 24/02/2010 |
|
|
|
UTITA T300 CNC Lathe
|
| SEIMENS SINUMERIK 810 CONTROL,
1.5 METRES BETWEEN CENTRES,
12’’ 3 JAW CHUCK,
10 STATION TURRET,
STEADY,
SWARF CONVEYOR,
NICE MACHINE,..... |
5,500.00 GBP |
| Ref: 8017 |
Updated 16/02/2010 |
|
|
|
FRORIEP 50 x 4000 mm cap 4 Rolls Plate Bender
|
| Work thickness: 50 mm,
Work width: 4000 mm,
Max thickness on 1 m length 87 mm;
Upper roll dia: 720 mm,
Lower roll dia: 550 mm,
Side rolls dia: 500 mm,
Pre-bending: 50 mm,
Main motor power: 125 HP,
Bending speed: 1450 rpm,
Weight: 92 t,..... |
135,000.00 EUR |
| Ref: 8159 |
Updated 15/02/2010 |
|
|
|
KITAMURA MyCentre 3 WB Twin Pallet CNC Vertical Machining Centre
|
| Twin Pallet,
Fanuc 11M Control,
2 off 30 Tool Changers,
Table Length: 1000mm,
Table Width: 420mmn
X Travel: 812mm,
Y Travel: 460mm,
Z Travel: 460mm,
Dimensions – 9ft wide x 17 ft long x 11ft height,
Price includes loading to lorry,..... |
4,000.00 GBP |
| Ref: 8297 |
Updated 15/02/2010 |
|
|
|
|
|
|
|
|
|
TORNOS Deco 2000/20 Swiss CNC Sliding Head Lathe (2 Mcs)
|
| Hours run: 36509,
10 axis,
Good quantity of tooling fitted to machine as shown on photos,
Parts catcher and conveyor,
Tornos Robobar SSF226 magazine barloader to accomodate upto 4 metre ( 12 foot) bar length,
Magnetic chip conveyor,
(Machine fully complete with all tanks and pumps etc..not all..... |
See Specification |
| Ref: 8329 |
Updated 11/02/2010 |
|