SARO SPA 10 HEAVY DUTY LATHE - 1250MM X 9M CAP

turning diameter over bed 1250mm turning diameter over carriage 920mm turning length 9000 mm spindle bore 105 mm turning speeds 8-1.250 U/min bed width 605 mm spindle taper 55027 Gr.11 taper in tailstock 6 Mk quill travel 300 mm total power requirement 22 kW weight of the machine c.....

17,000.00 EUR

Ref: 12047

NAKAMURA WT-250MMY CNC LATHE - (2008)

BAR CAPACITY: 2.5" CHUCK SIZE: 6" SWING OVER BED: 9.84" SWING OVER SADDLE COVER: 9.84" MAX TURNING DIAMETER: 9.84" MAX TURNING LENGTH: 21.85" STANDARD: 3.94" MACHINE DIMENSIONS(LxWxH): 159.8" x 91.10" x 87.6" SPINDLE CENTER HEIGHT FROM FLOOR: 47.05" WEIGHT: 8,700KG (19,183 LBS) 4500 RPM S.....

PRICE ON REQUEST

Ref: 12046

LORENZ E-30 HEAVY DUTY GEAR HOBBING MACHINE - (1977)

Max./Min. workpiece dia.: 6000 / 150 (mm) Table diameter: 1760 mm Max. module 27 Hob diameter: 300F Hob length : 350mm Clamping table diameter 2000mm Single cutting is possible. Original working diameter:3000mm . Extended with casted bed by 1500mm. Max working diameter 6,000mm With.....

365,000.00 USD

Ref: 12041

KRUPP POO QV1-3501.2/500 350 TON HYDRAULIC PRESS

Dimensions of the table 1100X1200mm.....

PRICE ON REQUEST

Ref: 12040

FADAL VMC 8030 CNC VERTICAL MACHINING CENTRE - (2004)

Spindle hours: 637 (almost new) X/Y/Z: 2032/762/762 mm Tool taper: SK 40 Table: 2100 x 762 mm Tool magazin: 21 stations Spindle speed: 10 - 10.000 U / min Drive capacity: 16,8 kw CNC Control FADAL Electronic hand wheel Indexing device: V 300, diameter: 400 mm, can be used as 4th axis.....

54,000.00 EUR

Ref: 12039

SW SCHWÄBISCHE WERKZEUGMASCHIN BA 35 CNC VERTICAL MACHINING CENTRE - (1995)

x-travel 2150 mm y-travel 500 mm z-travel 500 mm table-size 2 x 850x500 mm spindle taper ISO 40 spindle turning speed range 50 - 7500 U/min tool change unit 50-fach voltage 380 V CNC-control SINUMERIK 840 C total power requirement 22,5 kW weight of the machine ca. 12 t dimensions of the m.....

36,000.00 EUR

Ref: 12038

NORTE VS 800 CNC VERTICAL MACHINING CENTRE - (1989)

Siemens 820 Control, x-travel 1500 mm, y-travel 400 mm, z-travel 400 mm, table surface area 2000 x 450 mm, work table: 1500 x450, no. of flutes 2 Stück 18 H12, table load capacity 2000 kg, spindle turning speed range 20 - 6300 U/min, tool change unit ja 40 Stck., spindle cone ISO SK 40, p.....

18,000.00 EUR

Ref: 12037

EX-CELL-O XHC 241 CNC HORIZONTAL HIGH SPEED MACHINING CENTRE - (2004)

Control Systems: Sinumerik 840D with integrated PLC Seimens Indramat MTC 200 Costs £500,000 new.....

195,000.00 GBP

Ref: 12035

WMW ERFURT PYE 100 S/1M HYDRAULIC PRESS

Capacity : 100 ton Table dimensions: 750x560 mm Ram dimensions : 530x400 mm Table height above the floor: 710 mm Max shut height: 800 mm Throat: 360 mm Stroke: 500 mm Speed downwards: 320 mm/sec Speed upwards: 200 mm/sec Connection power: 17 kW Press weight: 5 ton.....

8,000.00 EUR

Ref: 12027

RYAZAN 1A64 UNIVERSAL SCREW CUTTING LATHE - (1975)

Swing over bed: 800 mm Swing over cross-slide: 480 mm Workpiece length: 2800 mm Workpiece weight: 3500 kg Spindle speed: 7,1...750 rpm Spindle cylindrical bore diameter: 105 mm Main drive power: 17 kW Machine dimensions: -Length: 5825 mm -Width: 2000 mm -Height: 1660 mm Machine weight:.....

8,500.00 EUR

Ref: 12026

HECKERT GFL 400X2000 THREAD MILLING- AND HOBBING MACHINE

max. workpiece diameter 400 mm threading length 2000 mm max. module 12 min. module 0,5 centre height 200 mm bore 80 mm lead of leadscrew 2 Gang/ 1 " threading diameter max. -internal 175 mm milling depth 35 mm electrics - voltage/frequency 380 / 50 V/Hz hob turning speeds 55 - 250 U/min t.....

16,500.00 EUR

Ref: 12024

ABB IRB 6400 / M98 ROBOT - (1999 –11–10)

Man order : 154461, Hours of operation : 16325 h,.....

11,000.00 EUR

Ref: 12019

CABINET OF DRILLS & REAMERS

1 Cabinet of Tooling containing Drills & Reamers as per photo.....

500.00 GBP

Ref: 12016

GRAFFENSTADEN AM 153C HORIZONTAL BORER + ROTARY TABLE - (1970)

Spindle diam: 220 mm (related to w movement), Octogonal ram: 390 x 417 mm (related to Z movement), Spindle speed: 10,13,16,20,25,32,40,50,63,80,100, 125,160,200,250,315,400,500 rpm Feed rate Milling: 6,8,10,12, 16, 20, 15, 32 ,40,50, 63,80, 100,125,160,200,250,315 ,400,500,630,800, 1000, 1250 mm.....

99,000.00 EUR

Ref: 11968

WICKMAN 1" X 6 SPINDLE AUTOMATIC LATHE - (1980)

Electric clutch Thread chasing Position 5 Pick up & back burr position 6 Tool holders Swarf conveyor Very nice machine Fully refurbished approx 1994.....

PRICE ON REQUEST

Ref: 12005

WICKMAN 1" X 6 SPINDLE AUTOMATIC LATHE - (Approx 1990)

Electric clutch Thread chasing position 4 Thread chasing Position 5 Pick up & back burr position 6 Electric coolant Vogel central lubrication Tool holders Swarf conveyor Excellent machine.....

PRICE ON REQUEST

Ref: 12004

PETIT-JEAN ESSOMATIC 2MD150 AUTOMATIC SWARF CENTRIFUGUE

Cycle time on spinners 7-15 mins adjustable . Max spinner capacity 80trs (150 kgs). 750 rpm spin speed. Total length of plant is 6.3mts .max width 2.5mts...it would transport in 4 sections largest being3.3x1.5x2.8 Weight not known . 8kw loading @415v 50hz requires 5bar compressed air......

13,000.00 EUR

Ref: 12003

WICKMAN 1-3/4" X 8 SPINDLE AUTOMATIC LATHE - (1970's)

4 Cross Slides, 2 Slab Slides, 1 Upper Independent Slide, 1 Piece Interlocked guarding, Stock Carriage & Stand, Swarf Conveyor, Small Selection of tool holders. (machine has been dismantled and put into storage).....

11,000.00 GBP

Ref: 11500

LANNER SWARF CRUSHERS (APPROX 30 OFF) S30GFV & S30GFR - 100KG/HR CAPACITY - IDEAL FOR LONG STRINGY SWARF - (2005)

specifications on request good condition available singly or as lots.....

PRICE ON REQUEST

Ref: 11995

WNW HECKERT CNC PLANO MILL 11.4M X 3.2M X 3M CAPACITY, 5 AXIS CONTROL

Table mm.10.000 x 2500 X Travel mm.11.400 Passage between columns mm.3200 Height under traverse mm.3000 1 Vertical Head Ram travel mm.1000 100 Kw 1000 rpm ISO 60 1 Side Head NC ELBO 100 cnc Complete with : 3 Milling heads, tooling. The machine is from approx 1989 Machine in.....

397,000.00 GBP

Ref: 11992

MITSUBISHI M-T42E CNC 6-SPINDLE AUTOMATIC SCREW MACHINE - (2006)

Spindle Diameter ...................... 3.25" Collet Size ........................... 1.65" Indexing, Servo Motor ................. 6 HP Indexing, Idle Time ................... 1.1 Seconds Cross Slide X-Axis Stroke ............. 5.9" Cross Slide Z-Axis Stroke ............. 2.83" Cross Slide X-.....

91,425.00 USD

Ref: 11991

STOLTING VB 1994 BENDING ROLLS - 2M X 6MM

Longueur utile : 2000mm Epaisseur de cintrage : 6 mm Epasseur de croquage : 5 mm 3 Pédales Peut établir des roulages coniques Résistence de tôles à cintrer 240 N/mm* Diamètre du rouleau supérieur et rouleau inferieur 190 mm Diamètre des rouleaux lateraux 155 mm moteur principal : 5,5 K.....

16,000.00 EUR

Ref: 11990

BUTLER PLANO MILL 5M X 2.1M BETWEEN COLUMNS - 2 MILLING & PLANING HEADS

BUTLER Double Column Planer Mill Table size 1.8m x 5m (6ft x 16ft) Max. distance between columns 2.1m - 7ft Max. distance under cross rail 1.67m . 66 in 1 x top + side future mill milling head 25/50 hp, 50 ISO, variable speed 1 x top + side planning heads All swivel heads price includes load.....

25,000.00 GBP

Ref: 11988

LANGFORD SONOMATIC 575 ULTRASONIC CLEANING BATH

220-240 V/AC 50-60Hz HF power: 300 watts HF Frequency: 40 kHz Capacity: 4.9 litres Operating Temperature: 60 Degrees Centigrade, Timer: 15 Mins, There is no lid or basket for this. These are available online......

200.00 GBP

Ref: 11987

CINCINNATI NO. 2 TOOL & CUTTER GRINDER

SWING OVER TABLE DIAMETER 10", TABLE SIZE 6"X36", LONGITUDINAL TABLE TRAVEL 16", CROSS MOVEMENT OF TABLE 10", TABLE SWIVEL 180 DEG., C/W DUST EXTRACTOR. DIMENSIONS 56" X 68" X 60"H.....

2,500.00 GBP

Ref: 11972